Just look

Vinly-siding-installation, while vinyl siding is not for everyone, millions of american homeowners have decided that it's exactly right for them. and if the substantial cost could be reduced, legions of others would surely.... Surface preparation for vinyl siding installation. securely nail all loose boards and wood trim, and replace any rotted boards. scrape away old caulking around windows and doors. the build-up of old caulking interferes with the positioning of new trim for the siding., vinyl siding installation is designed to hang loosely on the sheathing so that it can expand and contract with temperature changes. to prevent the relatively thin panels from buckling, observe these fitting and nailing rules. leave a 1/4-in. gap at all ends. the siding slides behind vinyl siding trim pieces that hide the gap and the cut end..

Vinyl siding can be installed over common wood sheathings such as plywood, oriented strand board (osb), or other materials (e.g., foam plastic insulating sheathing). the thickness of wood sheathing counts toward the total thickness that the fasteners must penetrate into nailable material, usually 1 1/4” (32mm)., the first piece of vinyl you're going to hang is on the starter strip. it will be made of aluminum and it usually comes about 3 inches in width and 12 feet long. it is important to check your level every four or five courses by putting a level on the siding. getting started on installing vinyl sidding..

The bottom of the starter strip (the part the bottom panel hooks on to) should be at least 1 in. below the top of the foundation, but the lower the vinyl siding is installed, the better. it protects the sheathing from rain, snow and pests. most suppliers sell two sizes of starter, 2-1/2 in. and 3-1/2 in. spend the extra few bucks on the wider stuff and start your siding a bit lower., created by the vinyl siding institute (vsi), this manual includes installation instructions based in part on astm d4756, standard practice for installation of rigid pvc siding and soffit. to get all the benefits of vinyl siding, ensure proper installation. find useful tips in our manual including historic restoration, how to clean vinyl siding (including stain removal), and recycling leftover vinyl siding scrap..

General contractor overhead and markup for organizing and supervising the vinyl siding installation. add 13% to 22% to the total cost above if a general contractor will supervise this project. sales tax on materials and supplies. permit or inspection fees (or portion thereof) required by your local building department for your overall project.