Just look

Harbor-breeze-ceiling-fan-light-works-but-not-fan, turn off the fan at the wall switch. unscrew the fan blades and remove the fan motor from the ceiling bracket to check the wiring connections. similar-colored wiring should be firmly connected together with a cap seated over the connection to prevent shorting problems. look for wires that are broken or with missing insulation.. If the fan will work in reverse but not in forward position, or vica versa, there could be a problem with either the motor, or another mechanism inside the fan. the reverse module could be bad inside of the fan. if that’s the case a replacement one is relatively inexpensive – less than $30 in most cases., harbor breeze is a trusted brand when it comes to ceiling fans. whether you are looking for a fan for your living space or a quiet ceiling fan for the bedroom, they have some of the best options out there.. however, just like any other brand, there are a couple of issues that may arise with your fan..

Ceiling fan light fix. if your fan works but lights dont. this fix may apply to many other models also., harbor breeze ceiling fan remote works light, but not fan [ 1 answers ]. i recently moved into a house with a remote controlled harbor breeze ceiling fan in the master bedroom..

1) check batteries and check and push reset button under cover 2) check bulb wattage, make sure watts do no exceed 190 watts total in upper and under glass shade, since fan has a built in function of a energy-saving limiter., i just bought and installed merrimack ceiling fan. when we use the remote it works to operate the fan but won’t turn off the light. i’ve shut the breaker off and held the high and low speed buttons for 5-10 seconds but it still doesn’t reset..

Bought 4 of the harbor breeze m52-5b/3l fans out of which 3 of them dont work. one of them the lights does not turn on, the second fan the fan itself is rotating slow and the 3rd one both fan and light do not work., if your ceiling fan is operating correctly, but the light kit fails, use the steps below to determine the cause: check that the light bulb is securely fastened into the socket. confirm the bulb has not burned out. if so, turn the power off and replace the light bulb..

We have a harbor breeze remote controlled ceiling fan/light. the light quit working a few weeks back. the fan and light are controlled by one wall switch. there are 2 pull cords and the remote. the fan works using all 3 controls (wall, pull-cord, remote). the light does not work using any...