Just look

Connecting-a-ceiling-fan-with-light, connect the white wires (neutral wires) from your fan and ceiling together. connect the green wire to your household ground wire (copper/bare wire). connect the black wires together. lastly, connect the blue wires together, or the blue wire to the black wire for lights.. The main thing to consider wiring a ceiling fan and light is determining how you want that fan to be controlled. for some, that will be any combination from no switches (using the included pull chains for powering the fan and/or light) and having separate switches for the light and fan., wiring a ceiling fan with a light with different switches requires a drill with a phillips tip bit, a pair of wire strippers and more. wire a ceiling fan with a light with different switches with....

Thanks guys. after 30 minutes of teetering on a high ceiling to add a light kit that would not light, i pulled the fan’s ceiling cap and found that the idiots who installed the fan didn’t take the extra (what) three seconds to connect the blue (light’s hot) wire to the black incoming line., i'm connecting a ceiling fan with light fixture attached in my house. i have two switches (for just fan or just light). not sure what wires to connect. in fan fixture there is a white, blue, black, and green at top. on fan mounting bracket there is green wire. coming out of my ceiling is a white, red, black, and copper..

Wiring connections for a ceiling fan may seem overwhelming when wiring to a wall switch for the fan motor and the light fixture, but this should help you out. white wires found in the ceiling junction box are sometimes used for switching when a wall switch is used. typically these white wires are identified with black tape or a black marker., connect the light's wires to the fan's wires with wire nuts. this should be done by simply lining up the two matching wires so that they are parallel and screwing a wire nut on the end, like you would a lid on a bottle. in most cases you will be attaching wires that are the same color together..

Connect the two black pigtail wires to the bottom brass screws on the switches by placing them in a clockwise direction around the screws and tightening the screws down on them. connect the red and..., wires inside the electrical box at the ceiling and at the back of the light are color coded to identify which wires from the light attach to which wires in the box. typically, a black wire always...