Just look

Ceiling-fan-light-pull-chain-wont-work, you'll need to remove the light kit from the fan, and take out the light switch inside. first, shut off the power running to the fan. you can do this from the circuit panel in your home. once the power is shut off, look at the base of the fan where the light kit is attached.. If your ceiling fan has a pull chain, it's directly wired to an electrical panel, and that's usually the first thing you should check if the fan doesn't work. if you hear a humming sound, however,..., put the new switch with pull chain into the ceiling fan, twist it with the same wires the old switch was connected to, and put the wire nut on the wires. put the fan housing back together. use a wire nut to connect the new switch to all of the wires attached to the lights..

Many ceiling fans and some ceiling light fixtures use pull chains to operate the unit. most commonly found in ceiling fans, these chains can break down and stop working. unfortunately, the only practical way to resolve this issue is to replace the chain., ceiling fan lights are an attractive way to lower your cooling bill. most of these fans are operated with pull switches to adjust the speed and light settings. over time the chain attached to the switch can jam , keeping you from pulling it. when this happens, the easiest solution is to simply ....

Ceiling fans with lights have a pull chainto turn the fan or the lights on or off. these pull chains get pulled on daily and can be broken. if you pull too hard on the pull chain the chain can break or come out of its socket. also, the light switchitself may wear out or fail., the ceiling fan has a wall switch and drop down chains to turn fan on/off also light chain. fan is working by switch and chain, but light chain won't pull to turn on light. light is off and i need it badly. please suggest..

I have a ceiling fan/light combination with 2 pull chains. (it is also wired to a 3-way wall switch) the pull chain for the light seems to be 'stuck' -- it won't pull down so to turn off the light i have to use the wall switch., damaged light sockets and a broken pull chain switch can also cause the fan’s lights to stop working. checking a few connections and making a couple of repairs can get your ceiling fan lights....

Lighting on a ceiling fan operates similarly to any other type of light fixture. the only difference is that the wiring for the light routes through the ceiling fan and connects to the main wiring with the wiring from the fan. a pull switch is mounted on the base of the fan to control the function of the light.