Ceiling-fan-doesnt-work-but-light-does, if you have a light fixture attached to the fan and the ceiling fan doesn’t work, but the light does, then you know that the power supply is sufficient. this means that you will likely have to do a bit more detective work to uncover the culprit of your stagnant ceiling fan. from here, you should check the wiring.. Turn off the breaker supplying electricity to the ceiling fan at you main electrical panel if the tester does not light. remove the screws holding the switch cover plate over the ceiling fan and..., when a ceiling fan doesn’t work at all, the first thing to do is to make sure it is receiving electrical power from its switch and from your home’s circuit breaker or fuse box. first check the circuit breaker or fuse, then the switch. find the electrical panel that serves the ceiling fan’s circuit..
Installing the ceiling fan with a light requires wiring the light to the main wiring. if you just installed the ceiling fan and the light does not work, the wires were not connected properly. consult the installation guide and correct the issue., i have a ceiling fan that is wired through a wall switch and it has a pull chain for the fan and another for the lights. the other day i turned on the wall switch and got a blue flash and the lights.
If your ceiling fan is operating correctly, but the light kit fails, use the steps below to determine the cause: check that the light bulb is securely fastened into the socket. confirm the bulb has not burned out. if so, turn the power off and replace the light bulb.