Just look

Bevel-siding-installation, installing bevel siding (clapboards) spacing for the siding should be laid out beforehand. the number of board spaces between the soffit and bottom of the lowest piece of siding at the foundation should be such that the overlap is as per the table. start with the bottom course using a furring strip to support the lower edge.. Align the bottom of the bevel plank with the bottom of the starter strip, with the end flush against the trim, and use a 4-foot level to level it. fasten the plank with galvanized ring shank nails..., bevel siding installation guide spacing for the siding should be laid out beforehand. the number of board spaces between the soffit and bottom of the lowest piece of siding at the foundation should be such that the minimum overlap is not less than 1 in. the wider the siding, the greater the overlap can be (see table 6)..

The old house web figure a: installation of bevel siding. the minimum lap for bevel siding should not be less than 1 inch. the average exposure distance is usually determined by the distance from the underside of the window sill to the top of the drip cap (see figure a).