Benq-projector-lamp-light-blinking-red, @stigpfau looks like your projector is in download mode. " in download mode, system will be supported by full power but will not turn on projector." - benq th681. Hi, i was able to obtain a used benq w1070 projector which had a fault. the red lamp light would come on seconds after boot up, after 2-3 seconds the fan noise would stop and 5-6 seconds after that the projector would give two beeps and shut down. i replaced the bulb with an original osram bulb..., benq combines advanced illumination technology with eye-care features. browse lamps for desk, computer work, bedside reading and more..

Hi, i was able to obtain a used benq w1070 projector which had a fault. the red lamp light would come on seconds after boot up, after 2-3 seconds the fan noise would stop and 5-6 seconds after that the projector would give two beeps and shut down., i have a benq w5000 home theater projector. i probably have used it for 150 hours and it's telling me the lamp / bulb is dead now (the power orange and lamp red light is on). i have tried several things with out success. for example unplugging the power supply and all the connections and taking....

Somebody help me. i have the same problem. my benq w1070 don´t start, just light power in red, no fan, no lamp, nothing else. please. - projector, the lights on the projector's control panel indicate the projector status and let you know when a problem occurs. check the status and color of the lights and look for a solution in the table below.. Power light status description flashing green the projector is warming up. wait for the image to appear. green the projector is operating normally. orange, when a classroom’s projector malfunctions, it not only impacts lesson plans but also impacts the ability of pupils to absorb pertinent information. if your school has a projector that is on the fritz, try these hacks to remediate the five most common projector issues..

Why does the power indicator blink red when i turn on the projector? the reason may be one of the following: the projector was turned on again too soon after it was turned off. wait for the lighting sequence to correct itself.